null Skip to main content

The Honey-badger 35" AT/MTB (Deck + Enclosure system)

$219.00
(No reviews yet) Write a Review

The Honey-badger 35" AT/MTB deck from tomiboi Esk8 is a bamboo/fiberglass board. The flex of the deck is customized to the specifications of each customer by adding or subtractiong bamboo and/or using different thicknesses of fiberglass. All flex levels are made from 7-10 layers of bamboo including two cross-cuts and have fiberglass sheathing on both the top and bottom of the deck.


The deck is 35" from tip to tail and 10.6" wide at its fattest point. There are two truck positions. The nose and tail are angled at 30 degrees with 25" of standing room between the bends. There is 0.5" concavity with an hour-glass contour. Lastly, the deck has just a hair of camber.


The decks are finished with high quality stain, paint and epoxy. Black grip or clear frit are available.


The enclosure is made from pressure-thermoformed, 2.5mm Kydex. D-seal is applied to the rim of the enclosure to help keep dust and moisture out. All hardware and installation are included with the enclosure. The maximum battery capacity is 14s4p with 21700 cells or 14s5p with 18650 cells in the single stack. The maximum capacity for the double-stack is 14s8p with 21700 cells or 14s10p with 18650 cells.

Naked decks and bulk-discounts are available. The decks are made to order and ship in about two weeks.


Quick Specs:


Length: 35"
Width: 10.6"
Nose/tail angle: 30 degrees
Construction: Bamboo w/ fiberglass top and base layer
Concavity: 0.5"
Camber: 0.125"
Foot-bed: 25"
Weight: 5lb