The 41.5" MTB deck with a carbon-fiber baselayer is the same shape and contour as the standard 41.5" except it has an upgrated construction and finish. The hard flex deck is 7-layers of bamboo thick including one cross-cut layer for medial-lateral strength. The stiff deck is made with 8-layers of bamboo (7+1). Both flex levels are have a thick carbon-fiber base-layer and fiber-glass sheathing on both the top and bottom.
The deck is 41.5" from tip to tail and 10.6" wide at its fattest point. There are two truck positions, and the nose and tail are angled at 30 degrees with 29.5" of standing room between the bends. There is 0.5" concavity with an hour-glass contour. Lastly, the deck has a hair of camber.
The flex of the deck is customized to the specifications of each customer by adding or subtractiong bamboo and/or using different thicknesses of fiberglass. All flex levels are made from 7-10 layers of bamboo including one cross-cut and have a thick carbon-fiber base-layer with fiberglass sheathing on both the top and bottom of the deck.
The decks are finished with high quality stain, paint and epoxy. The tops are ready to grip, skin or frit right out of the box.
The enclosure is made from pressure thermoformed 2.5mm Kydex. Single and double-stack enclosures are available. D-seal is applied to the rim of the enclosure to keep dust and moisture out. All hardware and installation are included with the enclosure. The maximum battery capacity of the single-stack is 16s4p 21700 and the double-stack is 16s8p 21700.
The flex is based on a 175 lb rider. Flex customization is available just send a message. Naked decks and bulk-discounts are availabel as well.
Nose/tail angle: 30 degrees
Construction: Bamboo w/ carbon-fiber base-layer and fiberglass sheathing
Weight (deck + enclosure): 8lbs 12oz