null Skip to main content

Murder Hornet- 32.5" Kicktail

(No reviews yet) Write a Review
Ships within 2-3 weeks

Named after everybody's favorite, homicidal insect, the Murder-Hornet is a 32" kick-tail deck made for psychopathic fun. Depending on how it gets built, it could be a cruiser, a thrasher or a downhill bomber. It is a bamboo/fiberglass composite deck built from 5 layers of bamboo in the body, 3 long + 2 cross-cut. The 27.5 mm deep compartment is made from an additonal 13 layers of veneer including 3 cross-cut in the base for added strength.

The regular fiberglass reinforcement for the kick-tail is 6 oz. The heavy-weight reinforcement uses 10 oz.

The compartment lid is made from verticlal-cut bamboo reinforced with FR4 fiberglass sheet. It is fastened in four places using threaded inserts, and the same bolts used for common skate-hardware. Four grooves have been made in the back of the compartment to assist with motor installation along with two wire-passes in the center for battery connections.

The grip is made from recycled glass-grit set in epoxy-resin. Black grip is available with fiberglass. The deck includes insets and bolts. !!!No additonal equiptment pictured is included!!!

The deck is available naked for people that would like to do the finish themselves, BUT it was designed as a bamboo/fiberglass composite deck and must be finished with the recommended amount of fiber-glass in order to perform as intended. !!!Decks sold unfinished will not be replaced if broken!!!


  • Five-ply bamboo in the body of the deck (3 long + 2 cross-cut). Thirteen-ply for the compartment (10 long + 3 cross-cut).
  • Additonal layer of bamboo availabel for riders 200+lbs.
  • Customizable fiberglass reinforcement on the base (Woven fabric + epoxy/resin). 
  • Water-tight, hand-contoured, integrated lid made from verticle-cut bamboo backed with 1/8" FR4 fiberglass. Fastened at four points with brass insets and standard skate-hardware for easy removal. 
  • The 27.5mm deep compartment can hold a variety of battery pack sizes.
  • Black grip made from glass grit embedded in epoxy is available.
  • Eight colors of stain are available (201 colors availabel for special order!).
  • Dimensions: 32.5" x 9.75" x 1.75"
  • Weight (est.): 5.5 lbs fully finished